WOOD SEALTM RECOMMENDED — USE:
Interior- Wood Seal (TM) Fire Retardant, Interior Class “B” pentetrant can be used on any type of unpainted wood and many other cellulose materials. Paint or stain can be applied over the treated material. Application may be accomplished, by either brush, roller, or spray methods. The coverage rate should be 150-350 square feet per gallon, depending upon the results desired. This product may be used on materials such as: Fir, Cypress, Cedar, Redwood, Pine, Straw, Paper/Cardboard, Wall Coverings, etc.
Environmental Regulations:
This product complies with U.S. Federal Regulations concerning the use of lead in paint AND hydrocarbon emissions.
Description: Aqueous Based Resin
[Analysis table from current site]
FX-100® Coating
RECOMMENDED — USE:
Interior– FX-100 (R) Fire Fire Protective Coating, Class “A” can be used on many types of porous or non-porous materials. Brush, roller, or spray methods may accomplish application. The coverage rate should be 150-350 square feet per gallon, depending upon the results desired. This product has an extreme level of fire protection due to the formation of a very thick insulation layering when exposed to fire. It has been said “if it will stick to a given surface, it will protect it from fire”. Some of the uses are: Wood (raw or painted), Steel, Aluminum, Plastics, etc.
Environmental Regulations:
This product complies with U.S. Federal Regulations concerning the use of lead in paint AND hydrocarbon emissions.
Description: Aqueous Based Resin
[Analysis table from current site]