Patterns

Here is a small sampling of popular patterns that we regularly produce.

Tongue & Groove V-Joint

Tongue and Groove V-Joint can be produced from any widths larger than 1×4 (finishes to net 3 1/8″ face), 1×6 (net 5 1/8″), 1×8 (net 6 7/8″), and 1×10 (net 8 7/8″). Typically used on walls and ceilings.

1″ Shiplap

Shiplap pattern can be produced from any widths larger than a 1×4. A 1×4 finishes to net face of 3 1/8″ , 1×6 will net 5 1/8″, 1×8 (net 6 7/8″), 1×10 (net 8 7/8″), and 1×12 (net 10 7/8″).

1″ Tongue & Groove Center-Match

Tongue and Groove Center Match can be produced from widths larger than 4″. 1×4 (finishes to net 3 1/8″ face), 1×6 (net 5 1/8″), 1×8 (net 6 7/8″), 1×10 (net 8 7/8″), 1×12 (net 10 7/8″). Typically used for floors, walls, and ceilings.

2″ Tongue & Groove Center-Match2″ Tongue and Groove Center Match can be produced from widths larger than 4″. 2×4 (finishes to net 3″ face), 2×6 (5″), 2×8 (6 3/4″), 2×10 (8 3/4″), 2×12 (10 3/4″). Typically used for decking, ceiling, and ceilings which are also used as a second-story deck application.

Bevel Siding Pattern

Our Bevel Pattern produced from a single 1×6 will create two Bevel pieces with a net face of 5″. A 1×8 will create two pieces with a 7 1/4″ face. 1×10 will create two 9 1/4″.

Drop Siding Pattern #105 (also known as Dutch Lap, Dutch Cove, German Lap, German Cove)

Pattern #105 (also known as Dutch Lap, Dutch Cove / German Lap, German Cove) produced from 1×6 will finish with a net face of 5″. 1×8 nets a 6 5/8″ face. 1×10 nets 8 5/8″.

Drop Siding Pattern #115Pattern #115 produced from 1×6 will finish with a net face of 5″. 1×8 will net 6 5/8″ face, and a 1×10 will finish 8 5/8″.

Drop Siding Pattern #117

Pattern #117 produced from 1×6 will finish with a net face of 5″. 1×8 will net 6 5/8″ face, and a 1×10 will net 8 5/8″.

Drop Siding Pattern #119

Pattern 119 produced from 1×6 will finish with a net face of 5″. 1×8 nets 6 5/8″ face. 1×10 nets 8 5/8″.

Drop Siding Pattern #121

Pattern #121 produced from 1×6 will finish with a net face of 5″. 1×8 nets 6 5/8″ face. 1×10 nets 8 5/8″.

Drop Siding Pattern #125

Pattern #125 produced from 1×6 will finish with a net face of 5″. 1×8 nets 6 5/8″ face. 1×10 nets 8 5/8″.

Drop Siding Pattern #139 with Resawn Face

Pattern #139 produced from 1×6 will finish with a net face of 5 1/2″. 1×8 nets 7 1/4″ face. 1×10 nets 9 1/4″.

Drop Siding Pattern #143

Pattern 143 produced from 1×8 will finish with a net face of 7 1/4″. 1×10 finishes to 9 1/4″.

Drop Siding Pattern #145

Pattern 145 produced from 1×8 will finish with a net face of 7 1/4″. 1×10 finishes to 9 1/4″.

Double Beaded CeilingWe also produce Cypress Shingles.

Here are the specifications:

“Old Growth” Heart Cypress Shingles

1. All fractional widths between and including 4″ to 8″.
2. Butt thickness 5/8″, with 1/8″ thickness at the skinny end.
3. Length is typically 18″. 20″ & 24″ can be produced as well.
4. 4 Bundles to the square, one square covers 100 Sq Ft.
5. The grade is clear of all defects, 100% all heart, flat sawn and vertical grain mix.
6. The texture is planer smooth one face, reverse face is re-sawn.

We supplied this product to John G. Waite and Associates, a highly acclaimed restoration architect firm out of Albany, New York. The project was the faithful and thorough restoration of Davidge Hall (circa 1810) at the University of Maryland, the oldest continuously operated medical amphitheater in the world.

Other Products